iGAGING Snap Check Plus Digital Height & Depth Gauge For Table Saw | Router | Jointer
iGAGING Snap Check Plus Multi-Purpose Digital Gauge
This iGAGING Snap Check Plus Gauge is one of iGAGING’s newest products. It comes installed with 3 strong neodymium magnets on the base leaving both hands free to adjust the machine in question, even if the surface is not steel/cast iron, the Snap Check is still heavy enough to hold it’s own weight without being moved as you adjust the tool in question(my router table plate is aluminium, and it works fine on this).
The plunger is spring loaded and can display readouts in mm, inches, and fractions, and comes with 2 anvil tips; a ball tip and a flat tip.
The 3 most useful applications would be:
Setting Jointer Knives
These are very difficult to get right, once you’ve found top dead centre, you can move the snap check across the knives to verify the are the same height all the way across. You can also calibrate the difference in height between the in and out feed of the jointer.
Setting Table Saw Blade Height
Another useful application would be setting the height of your table saw blade, using the built in neodymium magnets, you have both hands free to adjust the height of the blade to ensure the exact height of the blade, you can also measure blade run-out/wobble if your fence is made of the right material, if your fence is made of a plastic or another material that doesn’t attract magnets, you can always just hold the snap check against the fence.
Setting Router Table Height
This tool shine for setting router table heights, some router bits are angled towards a peak, and holding a metal rule next to the router bit is not always accurate.
Features:
Smooth Spring Plunger Movement
Flat and Ball Tip Anvils Included
Super Strong Rare Earth Magnetic Base
Humidity & Dust Resistant
Auto Shut Off
Display Inch/mm/Fractions
Accuracy 0.001"
Range: 0-1/4" depth, 0-2" height
Battery: 3V CR2032 included
Item No.: 35-0907-1
iGAGING Snap Check Plus Multi-Purpose Digital Gauge
This iGAGING Snap Check Plus Gauge is one of iGAGING’s newest products. It comes installed with 3 strong neodymium magnets on the base leaving both hands free to adjust the machine in question, even if the surface is not steel/cast iron, the Snap Check is still heavy enough to hold it’s own weight without being moved as you adjust the tool in question(my router table plate is aluminium, and it works fine on this).
The plunger is spring loaded and can display readouts in mm, inches, and fractions, and comes with 2 anvil tips; a ball tip and a flat tip.
The 3 most useful applications would be:
Setting Jointer Knives
These are very difficult to get right, once you’ve found top dead centre, you can move the snap check across the knives to verify the are the same height all the way across. You can also calibrate the difference in height between the in and out feed of the jointer.
Setting Table Saw Blade Height
Another useful application would be setting the height of your table saw blade, using the built in neodymium magnets, you have both hands free to adjust the height of the blade to ensure the exact height of the blade, you can also measure blade run-out/wobble if your fence is made of the right material, if your fence is made of a plastic or another material that doesn’t attract magnets, you can always just hold the snap check against the fence.
Setting Router Table Height
This tool shine for setting router table heights, some router bits are angled towards a peak, and holding a metal rule next to the router bit is not always accurate.
Features:
Smooth Spring Plunger Movement
Flat and Ball Tip Anvils Included
Super Strong Rare Earth Magnetic Base
Humidity & Dust Resistant
Auto Shut Off
Display Inch/mm/Fractions
Accuracy 0.001"
Range: 0-1/4" depth, 0-2" height
Battery: 3V CR2032 included
Item No.: 35-0907-1
iGAGING Snap Check Plus Multi-Purpose Digital Gauge
This iGAGING Snap Check Plus Gauge is one of iGAGING’s newest products. It comes installed with 3 strong neodymium magnets on the base leaving both hands free to adjust the machine in question, even if the surface is not steel/cast iron, the Snap Check is still heavy enough to hold it’s own weight without being moved as you adjust the tool in question(my router table plate is aluminium, and it works fine on this).
The plunger is spring loaded and can display readouts in mm, inches, and fractions, and comes with 2 anvil tips; a ball tip and a flat tip.
The 3 most useful applications would be:
Setting Jointer Knives
These are very difficult to get right, once you’ve found top dead centre, you can move the snap check across the knives to verify the are the same height all the way across. You can also calibrate the difference in height between the in and out feed of the jointer.
Setting Table Saw Blade Height
Another useful application would be setting the height of your table saw blade, using the built in neodymium magnets, you have both hands free to adjust the height of the blade to ensure the exact height of the blade, you can also measure blade run-out/wobble if your fence is made of the right material, if your fence is made of a plastic or another material that doesn’t attract magnets, you can always just hold the snap check against the fence.
Setting Router Table Height
This tool shine for setting router table heights, some router bits are angled towards a peak, and holding a metal rule next to the router bit is not always accurate.
Features:
Smooth Spring Plunger Movement
Flat and Ball Tip Anvils Included
Super Strong Rare Earth Magnetic Base
Humidity & Dust Resistant
Auto Shut Off
Display Inch/mm/Fractions
Accuracy 0.001"
Range: 0-1/4" depth, 0-2" height
Battery: 3V CR2032 included
Item No.: 35-0907-1