Mitutoyo Dial Indicator Lug Back 10mm Range | 0.01mm Graduation
SERIES 2 — Mitutoyo Standard Type Dial Indicator
Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
A carbide contact point is used.
The grand gear is made of stainless steel with high resistance to wear and deformation.
Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Functions: ISO type
Range: 10 mm
Range per rev.: 1 mm
Graduation: 0.01 mm
Scale: 0-100
Measuring force: 0.4-1.4 N
MPE any 1/10 revolution: 5 µm
MPE any 1/2 revolution: 9 µm
MPE any 1 revolution: 10 µm
MPE measuring range: 13 µm
H MPE (Hysteresis): 3 µm
R MPE (Repeatability): 3 µm
Mass: 144 g
Stem: 8 mm
Contact point: Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous dial: Yes
Shock proof: Yes
fu: 3 µm
Model #: 2046A
MADE IN JAPAN
SERIES 2 — Mitutoyo Standard Type Dial Indicator
Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
A carbide contact point is used.
The grand gear is made of stainless steel with high resistance to wear and deformation.
Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Functions: ISO type
Range: 10 mm
Range per rev.: 1 mm
Graduation: 0.01 mm
Scale: 0-100
Measuring force: 0.4-1.4 N
MPE any 1/10 revolution: 5 µm
MPE any 1/2 revolution: 9 µm
MPE any 1 revolution: 10 µm
MPE measuring range: 13 µm
H MPE (Hysteresis): 3 µm
R MPE (Repeatability): 3 µm
Mass: 144 g
Stem: 8 mm
Contact point: Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous dial: Yes
Shock proof: Yes
fu: 3 µm
Model #: 2046A
MADE IN JAPAN
SERIES 2 — Mitutoyo Standard Type Dial Indicator
Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
A carbide contact point is used.
The grand gear is made of stainless steel with high resistance to wear and deformation.
Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Functions: ISO type
Range: 10 mm
Range per rev.: 1 mm
Graduation: 0.01 mm
Scale: 0-100
Measuring force: 0.4-1.4 N
MPE any 1/10 revolution: 5 µm
MPE any 1/2 revolution: 9 µm
MPE any 1 revolution: 10 µm
MPE measuring range: 13 µm
H MPE (Hysteresis): 3 µm
R MPE (Repeatability): 3 µm
Mass: 144 g
Stem: 8 mm
Contact point: Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous dial: Yes
Shock proof: Yes
fu: 3 µm
Model #: 2046A
MADE IN JAPAN