Mitutoyo Dial Test Indicator Vertical Type Jeweled Bearing 0.2mm Range | 0.002mm Graduation
SERIES 513 — Mitutoyo Dial Test Indicator Vertical Type
A Mitutoyo versatile anti-magnetic type lever indicator (or dial test indicator, DTI) suited to alignment operations on machine tools and similar applications. This indicator automatically adapts to the required measuring direction on contact, and the jewelled movement provides lowest friction and stiction for smooth and precise operation. Supplied with a basic set of mounting accessories.
Designed to probe surfaces that cannot be reached with a normal dial gage. Useful both for alignment and for measurement purposes.
Mitutoyo’s proprietary new design permits smooth pointer operation.
Strong frame provides excellent rigidity and durability.
The pointer and carbide contact point are only slightly magnetizable, and so they are hardly affected by a magnetic environment.
Clear and concise wide dial face allows excellent visibility.
The surface of the crystal is hard-coated for excellent scratch resistance.
Flat crystal makes graduations easy to read. Moreover, the O-ring sealing method used for the bezel prevents water or oil penetration. (Note that this type is NOT water-proof.)
The main unit is equipped with three dovetails to which the stem with dovetail groove ø6 (standard accessory) can be attached. This greatly improves convenience as the attachment location can be adjusted as needed.
Completed products are inspected according to JIS B 7533:2015. Horizontal, horizontal (20º tilted face), and vertical types are inspected with the dial face in the upward orientation, while the parallel type is inspected with the dial face in the vertical orientation to guarantee their accuracy.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Functions: Basic set
Type: Basic set
Range: 0.2 mm
Graduation: 0.002 mm
Graduation: 0.002
Scale: 0-100-0
MPE any 10 scale divisions: 2 µm
MPE any 1/2 revolution: 3 µm
MPE measuring range: 3 µm
H MPE (Hysteresis): 2 µm
R MPE (Repeatability): 1 µm
Measuring force: 0.01-0.3 N
Carbide stylus tip ø2 mm No.: 103011
Contact point: Thread M 1.7 x 0.35
D Ø: 40 mm
Mass: 46 g
Model #: 513-455-10H
MADE IN JAPAN
SERIES 513 — Mitutoyo Dial Test Indicator Vertical Type
A Mitutoyo versatile anti-magnetic type lever indicator (or dial test indicator, DTI) suited to alignment operations on machine tools and similar applications. This indicator automatically adapts to the required measuring direction on contact, and the jewelled movement provides lowest friction and stiction for smooth and precise operation. Supplied with a basic set of mounting accessories.
Designed to probe surfaces that cannot be reached with a normal dial gage. Useful both for alignment and for measurement purposes.
Mitutoyo’s proprietary new design permits smooth pointer operation.
Strong frame provides excellent rigidity and durability.
The pointer and carbide contact point are only slightly magnetizable, and so they are hardly affected by a magnetic environment.
Clear and concise wide dial face allows excellent visibility.
The surface of the crystal is hard-coated for excellent scratch resistance.
Flat crystal makes graduations easy to read. Moreover, the O-ring sealing method used for the bezel prevents water or oil penetration. (Note that this type is NOT water-proof.)
The main unit is equipped with three dovetails to which the stem with dovetail groove ø6 (standard accessory) can be attached. This greatly improves convenience as the attachment location can be adjusted as needed.
Completed products are inspected according to JIS B 7533:2015. Horizontal, horizontal (20º tilted face), and vertical types are inspected with the dial face in the upward orientation, while the parallel type is inspected with the dial face in the vertical orientation to guarantee their accuracy.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Functions: Basic set
Type: Basic set
Range: 0.2 mm
Graduation: 0.002 mm
Graduation: 0.002
Scale: 0-100-0
MPE any 10 scale divisions: 2 µm
MPE any 1/2 revolution: 3 µm
MPE measuring range: 3 µm
H MPE (Hysteresis): 2 µm
R MPE (Repeatability): 1 µm
Measuring force: 0.01-0.3 N
Carbide stylus tip ø2 mm No.: 103011
Contact point: Thread M 1.7 x 0.35
D Ø: 40 mm
Mass: 46 g
Model #: 513-455-10H
MADE IN JAPAN
SERIES 513 — Mitutoyo Dial Test Indicator Vertical Type
A Mitutoyo versatile anti-magnetic type lever indicator (or dial test indicator, DTI) suited to alignment operations on machine tools and similar applications. This indicator automatically adapts to the required measuring direction on contact, and the jewelled movement provides lowest friction and stiction for smooth and precise operation. Supplied with a basic set of mounting accessories.
Designed to probe surfaces that cannot be reached with a normal dial gage. Useful both for alignment and for measurement purposes.
Mitutoyo’s proprietary new design permits smooth pointer operation.
Strong frame provides excellent rigidity and durability.
The pointer and carbide contact point are only slightly magnetizable, and so they are hardly affected by a magnetic environment.
Clear and concise wide dial face allows excellent visibility.
The surface of the crystal is hard-coated for excellent scratch resistance.
Flat crystal makes graduations easy to read. Moreover, the O-ring sealing method used for the bezel prevents water or oil penetration. (Note that this type is NOT water-proof.)
The main unit is equipped with three dovetails to which the stem with dovetail groove ø6 (standard accessory) can be attached. This greatly improves convenience as the attachment location can be adjusted as needed.
Completed products are inspected according to JIS B 7533:2015. Horizontal, horizontal (20º tilted face), and vertical types are inspected with the dial face in the upward orientation, while the parallel type is inspected with the dial face in the vertical orientation to guarantee their accuracy.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Functions: Basic set
Type: Basic set
Range: 0.2 mm
Graduation: 0.002 mm
Graduation: 0.002
Scale: 0-100-0
MPE any 10 scale divisions: 2 µm
MPE any 1/2 revolution: 3 µm
MPE measuring range: 3 µm
H MPE (Hysteresis): 2 µm
R MPE (Repeatability): 1 µm
Measuring force: 0.01-0.3 N
Carbide stylus tip ø2 mm No.: 103011
Contact point: Thread M 1.7 x 0.35
D Ø: 40 mm
Mass: 46 g
Model #: 513-455-10H
MADE IN JAPAN